Originally posted on LADOT Bike Blog:

City Planning’s David Somers has two blog posts today to explain how these prioritized bike lane projects will be moving forward. This post covers the public hearings for the project and the approval process afterwards, while his second post goes into more detail about the Draft EIR.  - Nate Baird

The City Planning Department has scheduled four public hearings to hear public comment on the First Year bicycle lanes. The projects include the nearly 40 miles of bicycle lanes that were evaluated in the recently completed Draft EIR in addition to one mile of bike lanes along Sunset Blvd. west of Figueroa St. The 40 miles of bike lanes include the first proposed protected bicycle lanes or ”cycle tracks” in the City as part of the MyFig Streetscape project, as well as strategic gap closures such as Venice Blvd. along with the introduction of critical bikeways in all major…

View original 462 more words

Originally posted on takeoverla:


Our pal Damain Riehl has jump started his front rack making business and you should support it. These are great looking handbuiltt racks from the Pacific Northwest. You can’t beat made in the USA goodness.

FB Page (Share and help spread the word!)

Swoop Here

Details:
20% off intro for a limited time.

Few have seen and many have asked. These are finally back in production starting with the simplest standard road bike 700c version. All that is required is a steel fork with a caliper brake mount hole and a bolt on(skewers are made to clamp, and are not suitable to support loads) axle. Recommended load limit is 70lbs, which is more than most people can handle, and any more will likely damage your frame before the rack itself.

Axle to crown length for this rack is 370-410mm and will allow front brake and fender clearance. Currently fabricating…

View original 11 more words

Originally posted on takeoverla:


Our pal Damain Riehl has jump started his front rack making business and you should support it. These are great looking handbuiltt racks from the Pacific Northwest. You can’t beat made in the USA goodness.

FB Page (Share and help spread the word!)

Swoop Here

Details:
20% off intro for a limited time.

Few have seen and many have asked. These are finally back in production starting with the simplest standard road bike 700c version. All that is required is a steel fork with a caliper brake mount hole and a bolt on(skewers are made to clamp, and are not suitable to support loads) axle. Recommended load limit is 70lbs, which is more than most people can handle, and any more will likely damage your frame before the rack itself.

Axle to crown length for this rack is 370-410mm and will allow front brake and fender clearance. Currently fabricating…

View original 11 more words

thus far

Cache 1st Male in for main Sunday race, Haulass track king (from what was explined to me= this years belt holder), Roz Track Queen (also this
years female belt holder). Jessie was first in for the messenger categort for the main race
. There’s more- that’s from memory thus far.